Follow us

MEGABIT Insights

Internet down in the office? How to diagnose and fix carrier fibre optic failures

Imagine the situation: the working day starts normally, employees turn on their computers and, suddenly, no one can access the internet. Blocked emails, inaccessible cloud systems, interrupted VoIP calls. For any company, a total loss of connectivity can mean immediate losses and enormous pressure on work teams.

This scenario is more common than it seems, and the cause isn’t always inside the company’s premises. Often, the problem lies in the carrier’s own equipment, the component that receives and converts the fibre optic signal for the internal network. In this article, we explain how to identify this type of fault, what to do immediately and how to ensure the situation doesn’t happen again without proper diagnosis.

How a fibre optic connection works in a company

Before moving on to diagnosis, it’s useful to understand the chain of equipment involved in a business fibre optic connection. Typically, the fibre signal enters the premises and reaches a piece of carrier equipment, generally called an ONT (Optical Network Terminal) or fibre terminal. This device converts the optical signal into a network signal that can be distributed by the router and, from there, throughout the internal infrastructure.

This equipment belongs to and is managed by the carrier, which means the end user has physical access to it, but doesn’t have full control over its configuration. When this component fails or enters an error state, the entire internet connection is compromised, even if the router, switches and computers are working perfectly.

Signs that the problem is in the carrier’s equipment

It isn’t always obvious where the fault originates. However, there are clear indicators that point to the carrier’s equipment as the main cause:

  • Fibre or PON light showing red or off on the carrier’s terminal, indicating loss of optical signal.
  • No internet connection on any device on the network, including those connected by cable and Wi-Fi.
  • The internal router shows a connection to the local network, but without internet access, which suggests the problem is upstream of the router.
  • Restarting the router doesn’t fix the problem, because the fault isn’t in that equipment.
  • Other carrier services also fail, such as IPTV or VoIP landline phone provided in the same package.

When several of these signs are present at the same time, the likelihood that the fault lies in the carrier’s terminal is very high.

Steps to diagnose and try to fix the fault

When faced with a total internet outage, there’s a logical sequence of steps that any IT manager or office manager should follow before escalating the problem to the carrier or an external technician.

1. Visually check the carrier’s equipment

Look at the status lights on the fibre terminal. Each carrier has a different legend, but generally a continuous green light indicates normal operation, while red, flashing or off lights indicate a fault. Photograph the state of the lights for future reference.

2. Restart the carrier’s terminal

This is often the most effective step. Unplug the equipment from the mains, wait at least 30 seconds and plug it back in. The startup process can take between 2 to 5 minutes. If the connection is restored, the problem was probably a temporary firmware lock-up or a loss of synchronisation with the carrier’s network.

3. Restart the router next

Once the carrier’s terminal is fully operational, also restart the internal router. This ensures the router obtains a new IP address and establishes a clean connection with the carrier’s equipment.

4. Test the connection and monitor

Check whether the internet is working on several devices and through different methods, such as accessing websites, ping tests and checking cloud services. Even if the connection seems stable, it’s important to keep monitoring it over the following hours, especially if the fault occurred unexpectedly.

When restarting isn’t enough: the importance of the carrier’s technical visit

There are situations where restarting apparently fixes the fault, but the equipment continues to report internal errors or the connection remains unstable. It’s particularly important not to ignore this scenario. A fibre terminal may appear to be working normally to the user, with internet accessible, but internally present hardware faults or optical signal degradation that can only be detected with specific diagnostic tools.

In these cases, keeping the carrier’s technical visit scheduled is essential, even if the internet is working at the time. The carrier’s technician has access to remote and on-site diagnostic tools that assess the quality of the optical signal, the condition of the hardware and the stability of the line, and can replace the equipment if necessary.

Postponing or cancelling this technical visit can result in new faults, sometimes at even more critical moments for the business.

Best practices to minimise the impact of internet failures

No infrastructure is completely immune to failures, but there are measures that significantly reduce the impact when they happen:

  • Have a connectivity contingency plan, such as a backup 4G/5G router that automatically activates when the main line goes down.
  • Document the network equipment present on the premises, including the model and location of the carrier’s terminal, to speed up diagnosis in urgent situations.
  • Establish direct contact with the carrier’s technical support, preferably with a contract number or customer reference, to speed up the opening of support tickets.
  • Rely on specialised external IT support that can intervene quickly to identify the source of the fault and coordinate with the carrier when necessary.

Need help? Contact MEGABIT at comercial@megabit.pton-site support in Baixa do Porto and the entire Northern region of Portugal.

Want to be notified when we publish our next article or video?

Free. Get notified as soon as we publish. No spam, easy to unsubscribe.

Liked it? Share this article

Related articles

Need help with your company's IT?

A single point of contact for all your IT needs. Talk to us, we respond quickly.