Follow us

MEGABIT Insights

Weak Wi-Fi? How to Optimise Access Point Coverage in Apartments and Accommodation

The quality of a Wi-Fi connection in an apartment, accommodation unit or office doesn’t depend solely on the equipment installed, but fundamentally on its location. It’s possible to have top-of-the-range access points and still experience poor coverage in bedrooms or areas far from the entrance, simply because the equipment is badly positioned. This is a more common problem than it seems, and it has a direct technical solution.

In this article we explain how to diagnose Wi-Fi coverage gaps in indoor environments, the most frequent mistakes made when installing access points, and how repositioning the equipment can completely transform network quality, without the need to replace hardware.

What Happens When There’s No Dedicated Access Point Indoors

In many buildings, the chosen solution is to install the network equipment at a central point, hoping the signal reaches every unit. In practice, without a dedicated access point inside each space, the result is almost always unsatisfactory.

  • The connection mostly occurs on the 2.4 GHz band, as it has greater range, but with limited speed and stability.
  • Signal strength is weak, especially in rooms further from the source.
  • Performance is limited to basic use, such as simple browsing or low-bandwidth apps.
  • Services like streaming, video conferencing or file transfers become compromised or unusable.

When there’s an access point installed in each unit, the situation improves significantly. However, the mere presence of the equipment doesn’t guarantee uniform coverage. The location where it’s installed is equally decisive.

The Location Problem: When the Access Point Is Badly Positioned

A recurring mistake in network installations in apartments and accommodation is placing the access point at the entrance of the unit, often inside a technical or telecommunications cabinet. This solution is practical from a cabling standpoint, but it immediately creates a physical barrier to signal propagation.

What happens in this scenario is the following:

  • The access point ends up wedged between walls right at the exit of the technical cabinet.
  • There’s a wall a few metres in front of the equipment, acting as an immediate obstacle.
  • The signal is attenuated before it can spread through the interior of the apartment.
  • Bedrooms and living areas further away receive a significantly weaker signal.

The practical result is a network that works but isn’t optimised. The user connects, but experiences speed drops, streaming instability and difficulties with video calls, especially in interior rooms.

The Solution: Repositioning the Access Point to the Ceiling

The technical recommendation for this type of situation is clear: the access point should be relocated to the ceiling, in a central, unobstructed area of the apartment. This approach brings concrete, measurable benefits.

The technical reasons for ceiling installation are as follows:

  • Omnidirectional signal dispersion: installed on the ceiling, the access point radiates the signal evenly in all horizontal directions, uniformly covering every room.
  • Absence of immediate obstacles: unlike wall or cabinet installation, the ceiling is typically free of nearby physical barriers.
  • More uniform coverage: bedrooms, hallways and common areas start receiving equivalent signal quality.
  • Significant stability improvement: the connection becomes more reliable for demanding uses such as 4K streaming, video calls and simultaneous use of multiple devices.

Ideal installation positions include near the existing smoke detector (taking advantage of the central location these devices usually occupy) or a central area of the room, near the main light fixture. Both options offer visibility to most rooms without significant physical obstacles.

How to Assess Whether Your Network Needs Intervention

Before any technical intervention, it’s worth running a simple diagnosis to confirm the source of the problem. These are the most common warning signs:

  • The Wi-Fi has good quality at the entrance or living room, but degrades in the bedrooms.
  • Devices automatically connect to the 2.4 GHz band even when 5 GHz should be available.
  • Streaming or video calls become unstable in certain areas of the space.
  • The signal drops when a door is closed between the user and the router or access point.

Wi-Fi network analysis tools, freely available for smartphones, let you visualise signal strength in dBm at different points in the space. Values below -70 dBm indicate insufficient coverage for demanding uses. A specialised technician can carry out this mapping systematically and propose the most suitable solution for each space.

In summary, access point positioning is the main limiting factor for Wi-Fi coverage in indoor environments. Before investing in new equipment, it’s always worth assessing whether the problem isn’t simply one of location: a low-cost intervention with an immediate impact on network quality.

Why does the Wi-Fi reach the living room well but is weak in the bedrooms?

The most common problem is the location of the access point. When the equipment is installed next to a wall, at an entrance or inside a technical cabinet, the signal is attenuated before reaching the interior rooms. Walls, doors and other physical obstacles significantly reduce signal strength, especially on the 5 GHz band. The solution is to reposition the access point to a central, unobstructed area, preferably on the ceiling.

What’s the difference between the 2.4 GHz band and the 5 GHz band for indoor coverage?

The 2.4 GHz band has greater range and penetrates walls and obstacles better, but offers lower speeds and is more prone to interference. The 5 GHz band provides much higher speeds but has shorter range and is more sensitive to physical obstacles. In an environment with multiple bedrooms and intermediate walls, correct access point installation is essential for both bands to work effectively throughout the space.

Is it worth installing an access point per apartment instead of relying on a central router?

Yes, especially in buildings with multiple apartments or accommodation units. Without a dedicated access point inside each unit, the signal coming from external equipment arrives with very reduced quality, suitable only for basic browsing. For services like streaming, video conferencing or simultaneous use of several devices, an access point per unit, correctly positioned, is essential.

Need help? Contact MEGABIT at comercial@megabit.ptin-person support in Baixa do Porto and the entire Northern Portugal region.


Need to install or optimise your company’s network in Porto? Learn more about Business Networks in Porto and contact MEGABIT for a no-obligation quote.

Want to be notified when we publish our next article or video?

Free. Get notified as soon as we publish. No spam, easy to unsubscribe.

Liked it? Share this article

Related articles

Need help with your company's IT?

A single point of contact for all your IT needs. Talk to us, we respond quickly.