Follow us

MEGABIT Insights

The server disk has failed: what to do in the first 60 minutes

O disco do servidor avariou: o que fazer nos primeiros 60 minutos

It’s 9am, the office is starting to fill up, and the company server stops responding. An employee tries to access the shared files but gets an error message. The systems administrator looks into the situation and confirms the worst: a disk has failed. On its own, this scenario is already serious, since a server should never depend on a single disk and should have a RAID system in place to ensure redundancy. If, despite this, the failure caused data unavailability or loss, it means the RAID was not being properly monitored and other disks had already failed previously, eliminating redundancy without anyone detecting or fixing the problem. It is at this moment, in the first sixty minutes after the problem is detected, that the decisions made determine whether the company’s data is recovered or lost forever.

Hard drive and SSD failure is one of the most common emergency situations in small and medium Portuguese businesses, and also one of the most poorly handled. The pressure to restore the system quickly often leads to hasty actions that make the problem worse. This article explains how to act methodically, what to do and, just as important, what never to do in the hours following a storage failure.

Types of failure: knowing what happened changes everything

Not all disk failures are the same. Understanding the type of failure helps you make the right decisions before calling in a specialist.

  • Logical failure: the disk is physically intact, but the file system is corrupted, the partition has been deleted, or the disk has been accidentally formatted. This is the most favourable scenario for recovery.
  • Firmware failure: the problem lies in the disk’s internal software, which prevents access to data even if the platters or memory cells are in good condition.
  • Mechanical failure (HDDs): damaged read heads, worn bearings or scratched platters. Requires intervention in a clean room and is the most delicate situation.
  • Electronic failure: the disk’s control circuit has failed. In some cases, replacing the control board allows data access to be restored.
  • SSD failure: can result from NAND cell wear, controller failure or firmware issues. Recovery is technically more complex than with HDDs.

The most common symptoms include: the disk not being recognised by the operating system, clicking or scraping sounds (on HDDs), frequent read and write errors, extreme slowness when accessing files, or the computer simply not starting up. Each of these signs points to different causes and requires a different approach.

The mistakes that turn a crisis into a catastrophe

When a disk fails, the natural instinct is to try to fix the problem immediately. It is precisely this instinct that, without technical guidance, causes more damage than the original failure. These are the most frequent mistakes made by companies:

  • Turning the disk on and off repeatedly in the hope it will start up. In mechanical failures, each spin-up attempt can scratch the platters and permanently destroy the data.
  • Installing recovery software on the damaged disk itself. Any write operation on the disk can overwrite the data you’re trying to recover.
  • Formatting the disk to try to restore the system. Even if the system prompts you to format it, never do so before attempting to recover the data.
  • Using the disk as the destination for the recovery itself. The source disk and the destination disk must always be different.
  • Putting it off for later. The more time passes, especially in mechanical failures, the lower the chance of successful recovery.

The golden rule is simple: whenever there’s any sign of disk failure, the first action is to shut down the equipment in a controlled manner and contact a specialist technician before any other intervention.

The correct protocol for the first few hours

If a disk in your company’s computer or server shows signs of failure, follow this protocol before making any other decision:

  • Shut down the equipment cleanly, if still possible. If it is unresponsive, cut the power directly.
  • Do not turn it back on without technical guidance, especially if you hear unusual sounds.
  • Document the symptoms: when they started, what error messages appeared, and whether there was any event before the failure, such as a power surge or physical impact.
  • Check whether a recent backup exists and what condition it is in. If the backup is available and up to date, the priority becomes restoring the system as quickly as possible.
  • Contact a specialist experienced in data recovery before attempting any internal intervention.

If your company already has IT support in place, this is the moment to activate that support urgently. Companies working with MEGABIT’s Hour Bundle have access to specialised technical support without bureaucracy, paying only for the hours actually used, which is particularly valuable in emergency situations like this one.

Prevention: the only strategy that guarantees peace of mind

Data recovery is always a last-resort process, that is, the final option when everything else has failed. True protection of your company’s information relies on a robust backup strategy, tested regularly and monitored by professionals.

An effective backup policy for SMEs should follow the 3-2-1 rule: three copies of the data, on two different media, with one copy offsite or in the cloud. But just as important as making the backup is testing it. A backup that has never been tested is a backup whose reliability is unknown, and discovering it has failed exactly when you need it most is a scenario no company should have to experience.

Beyond backups, proactive monitoring of disk health, through tools that analyse S.M.A.R.T. parameters, makes it possible to detect signs of degradation before a complete failure occurs. This is one of the practices included in the managed IT support that MEGABIT provides to companies in Porto and Greater Porto, through IT support for businesses tailored to each organisation’s needs.

Frequently Asked Questions

Is it possible to recover data from a disk that won’t start up?

In most cases, yes. A disk that won’t start up may have a logical failure, file system corruption or a damaged boot partition: situations in which recovery has a high success rate. Even in partial physical failures, specialist technicians can often extract the data using professional tools. The most important thing is not to try turning the disk on and off repeatedly, as this worsens the physical damage and reduces the chances of recovery.

How long does a data recovery process take?

It depends on the type and severity of the failure. Simple logical recoveries can be completed within a few hours. More serious physical failures, which require work in a controlled environment, can take several days. For this reason, prevention through regular, tested backups remains the most effective strategy for ensuring business continuity without prolonged interruptions.

Should the company try to recover the data internally or call in a specialist?

Unless the company has experienced IT technicians and professional recovery tools, the recommendation is always to contact a specialist. Poorly executed recovery attempts, such as installing software on the damaged disk or forcing the reading of sectors with errors, can overwrite the data and make recovery impossible. A prior technical assessment, even if the disk appears inaccessible, is always the right step.

MEGABIT is ready to help when time matters

When a disk fails in a company, there’s no room for improvisation. MEGABIT supports SMEs in downtown Porto and across the entire Northern region of Portugal with specialised technical support, both in emergency situations and in implementing prevention strategies that stop these crises from happening. Our Hour Bundle model was designed precisely for companies that want access to quality support without long-term commitments, paying only for what they use.

If a disk in your company’s server or computer is giving you trouble, or if you want to implement a backup policy that actually works, contact us: comercial@megabit.pt. We respond quickly because we know that in data loss situations, time is the most critical resource.

Want to be notified when we publish our next article or video?

Free. Get notified as soon as we publish. No spam, easy to unsubscribe.

Liked it? Share this article

Related articles

Need help with your company's IT?

A single point of contact for all your IT needs. Talk to us, we respond quickly.